Pferd 21105226 Cylinder Shape Radius End WRC Carbide Burr Cut 3 Plus 10 x 20 x 6mm

The Pferd 21105226 Cylinder Shape Radius End WRC Carbide Burr Cut 3 Plus 10 x 20 x 6mm is made with a cut 3 plus crosscut designed ideal for machining and high stock removal.

This Burr is suitable for fine and coarse stock removal on metals such as cast iron, steel, stainless steel, nickel alloys and titanium alloys.

This tungsten carbide burr is versatile as it can operate to a high level on several of the key materials used in industrial manufacturing. This Burr is suitable for fine and coarse stock removal on metals such as cast iron, steel, stainless steel, nickel alloys and titanium alloys.

The bur is combination of cylindrical and ball shaped and has a radius that is in accordance with DIN 8032 and a cut of DIN 8033.

Pfred offer high quality tools made to have a long service life, with extremely accurate concentricity allowing for impact free working and no chatter marks to damage the surface, this reduces wear on the drive and the tool further extending the service of the tool.

High rotation and cutting speed ensure the efficient use of the tool. Burrs with a shank diameter of 6 mm should be used with drives with a power output from 300 watts.

This 21105226 WRC burr can be used with a multitude of drive type including drive spindles, flexible shaft drives, robots, stationary machines, straight grinders and tool machines.

Recommended for use on annealed cast iron, black annealed cast iron, case hardened steels, cast iron, cast steel, cobalt alloys, grey/nodular cast iron, hard aluminium alloys, hardened, heat treated steels over 1200 N/mm², high temperature resistant materials, nickel alloys, stainless steel, steel, cast steel, tool steels, white annealed cast iron.

Features

• Combination of cylindrical and ball shaped

• High stock removal rate

• Effective at fine and coarse stock removal

• High quality

• Long service life

• For use with drives with 300 watts of power output